[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Fan Coil Units



Hello all,

In a fan coil unit, is it possible to input a large number for the 
fresh air inlet flow rate during an autosized run? For instance...

FAN COIL UNIT:4 PIPE,
    F:1,                     !- name of fan coil unit
    Psched:1,                !- availability schedule
    autosize,                !- maximum air flow rate {m3/s}
    0.1036725,               !- maximum outside air flow rate {m3/s}
    etc.

When I do try this, it usuually results in unsatisfactory internal 
climate conditions. Can anyone help as I would like to force full 
fresh air through the units?

Kind regards

-Elmer





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Home is just a click away.  Make Yahoo! your home page now.
http://us.click.yahoo.com/DHchtC/3FxNAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/