[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] opaque envelopes performances comparison

Gents,

 

I am doing a research experiment related to study how opaque envelopes
design effects building performances.

Basically the experiment compares different walls:

- high thermal inertia - high insulation - opaque ventilated facades 

And different buildings having different ratio surface / volume

That is related to 6 different climates.

 

The result would be a table that shows which envelope has better performance
in different climates and building geometry.

To comparison parameter will be Kwh/m2 per year.

 

I'm wondering if to get this values I could use a Purchased Air for evaluate
the different building/envelope performances using the Purchased Air outputs
to evaluate these performances, rather then set up an HVAC for every
building. 

 

Thanks everybody for your attention, and please send me any kind of advises!

 

Emanuele Naboni

 

 



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Something is new at Yahoo! Groups.  Check out the enhanced email design.
http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/