[EnergyPlus_Support] Re: Lost Messages - convertESOMTR

["aboyemeplus" <Merid.Aboye@xxxxxxxxxxxxxx>]

Hello Mike,

Has a revised version of "convert.txt" been released since we 
identified the errors mentioned below? For future reference, where 
do I look for updated files? 

Merid 


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Michael J. Witte" 
<mjwitte@...> wrote:
>
> My apologies for the delay in responding to question 1 below.  I 
think you are 
> right that there is a mistake in the conversion factor for W-
>kBtuh.  In fact, 
> it appears that all conversion factors for kBtuh are wrong.  When 
this has been 
> fixed and checked (and re-checked), we will make a revised file 
available here 
> in the yahoo group.
> 
> Mike
> 
> 
> 
> On 5 May 2006 at 15:40, aboyemeplus wrote:
> 
> > A couple of my messages did not get posted yesterday. Will 
attempt 
> > to repeat them here.
> > 
> > Message #1
> > 
> > Jason,
> > 
> > Moving  the W->kW line below the W->kBtuh  line did the trick! 
> > However, the energy rates in "kBtu/hr" were a lot lower than the 
> > values I had manually converted previously, using the results 
from 
> > the SI reports. The  W->kBtuh conversion factor used in 
> > the "convert.txt " is not correct. There are 1/0.2928 or 3.414 
> > Btu/hr/Watt not 0.2928 Btu/hr/Watt. Therefore, the final 
conversion 
> > factor becomes 3.414 * E-3  kBtu/hr/Watt. Please verify and let 
me 
> > know if you agree. Thank you for your support.
> > 
> > Merid 
> > 
> > Message #2
> > Reported Zone Mean Radiant temperatures do not match input 
> > cooling /heating setpoints. Since the value of the "time 
setpoints 
> > not met" output variable is 0 hours, I am concluding that 
Zone/Sys 
> > average temperature is the controlled variable. Unfortunately, I 
am 
> > unable to generate this variable. The Error file does not 
provide 
> > further information on how to resolve this issue. Any hints on 
how I 
> > can generate zone average Air temperature data is greatly 
> > appreciated.
> > Thank you for your support.
> > 
> > Merid 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > The primary EnergyPlus web site is found at:
> > http://www.energyplus.gov
> > 
> > The group web site is:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> > 
> > Attachments are not allowed -- please post any files to the 
appropriate folder
> > in the Files area of the Support Web Site.
> > 
> > EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf 
and press the
> > "search" button.
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> > 
> > 
> 
> 
> ========================================================
> Michael J. Witte, GARD Analytics, Inc.
> EnergyPlus Testing and Support      
> EnergyPlus-Support@...
>






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/