[EnergyPlus_Support] Heat Recovery Calculation Difference

["energypluser" <energypluser@xxxxxxxxxxxx>]

Dear all

I use a water heater to recover the exhausted heat from an IC engine.
>From the results, I found that there are more than 10kW difference between the total 
exhausted heat that is recovered and the source side heat transfer rate of water heater. Since 
there is only one water heater in the heat recovery loop, why does the difference exsit?
Thank you in advance.

mac.cz





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Great things are happening at Yahoo! Groups.  See the new email design.
http://us.click.yahoo.com/TISQkA/hOaOAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/