[EnergyPlus_Support] water heater source side capabilities

["chudson416" <2hr@xxxxxxxx>]

Must the source side of a water heater:mixed necessarily have a 
bypass?  I am trying to model the supply side a heat recovery loop 
with a pump (as the supply inlet branch), a water heater (source 
side), and an exit pipe.  Although the branches pass integrity 
testing, I receive a node connection error at the water heater inlet 
node with the statement that the inlet node did not find an 
appropriate matching "outlet" node.  Same is true for the supply exit 
pipe.  In the supply side of the loop, I have 15 m/s flow in and 0 m/s 
flow out.  Any suggestions would be appreciated!





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/