[EnergyPlus_Support] Re: Error -- Mass Flow Rate Calculation ........

["ingdallolio" <ing.dallolio@xxxxxxxxx>]

Thanks a lot Sankar for your message.
I just uploaded the file. "tempering valve_60m2"
Andrea.


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Sankar 
<sankar.padhmanabhan@...> wrote:
>
> Andrea,
> Could you upload the file to the yahoo groups folder or send it to 
me 
> at sankar.padhmanabhan@...
> 
> Thanks
> Sankar
> 
> At 06:02 PM 10/14/2006, you wrote:
> 
> >Hi, I'm using the new E+ 1.4 now and I set all water loops flow 
rates
> >to autosize, still I get :
> >
> >Warning ** Error -- Mass Flow Rate Calculation in Plant 
Loop=SECOND
> >LOOP, Outlet and Inlet differ by more than tolerance.
> >** ~~~ ** Occurrence info=TRIESTE, 01/21 00:00 - 01:00
> >** ~~~ ** Loop inlet node=SECOND LOOP PUMP INLET,
> >flowrate=0.2087 m/s
> >** ~~~ ** Loop outlet node=OUTLET SECOND BOILER,
> >flowrate=0.4173 m/s
> >
> >My idf is very similar to the SolarCollectorFlatPlateWater example
> >file, but instead of heating domestic water my system feed a 
radiant
> >floor. I have the problem on the radiant floor loop.
> >
> >Any idea ?
> >Thanks.
> >Andrea.
> >
> >--- In 
> ><mailto:EnergyPlus_Support%
40yahoogroups.com>EnergyPlus_Support@xxxxxxxxxxxxxxx, 
> >"ingdallolio"
> ><ing.dallolio@> wrote:
> > >
> > > Hello,
> > >
> > > I Uploaded the file tempering valve_60m2,
> > > before I added the tempering valve this file did only give few
> >warnig
> > > (clear origin) , now I get 174 times :
> > > Error -- Mass Flow Rate Calculation in Plant Loop=SECOND LOOP,
> >Outlet
> > > and Inlet differ by more than tolerance.
> > > Any idea about this ?
> > > Thanks for reading this.
> > > Andrea
> > >
> >
> >
> 
> 
> [Non-text portions of this message have been removed]
>





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/