[EnergyPlus_Support] Re: question about Infiltration Sensible Heat Loss

["taozus" <taozo@xxxxxxxxx>]

Dear Miguel,
thanks for your comment!
It was so simple! and I was really blind not to see that...
That was actually the right explanation: I made both simulations
(heavy walls and light walls) using a constant internal temp, and this
time the two "Infiltration Sensible Heat Loss" values are eventually
identical.
thanx a lot.
Matteo.



--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Miguel Angel Pascual"
<mapascual@...> wrote:
>
> Dear matteo,
> 
> The easiest explanation is that you have different zone temperatures
during non heating hours. 




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/