[EnergyPlus_Support] Re: Ventilation

["jq_plain" <jqplain@xxxxxxx>]

If you use the ventilation model, you can control the on/off according 
to the temperature of indoor and outdoor air; but if infiltration, this 
can not be done.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "eric_zhou1223" 
<eric_zhou1223@...> wrote:
>
> Hi£¬
> 
> I want to confirm one knowledge about ventilation and infiltration 
> object..
> If I do not care for the fan electric consumption, then I would think 
> these two objects in E+ are totally same. I checked the I/O 
> documentation and found they used the same equations. 
> Now I have an in-site test with a pair of intake/exaust fans. The 
> impact of the ventilation air on the load is only concern.
> Can I simply use the Infiltration Object to simulate it?
> 
> Eric
>




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/