[EnergyPlus_Support] Frame and divider

["teomj23" <teomj23@xxxxxxxxxxx>]

Dear all,
I exported a building from Design Builder to Energy Plus and I have a 
problem with the identification of frames in the SubSurfaces.
In the E+ SubSurface section the frame is labelled only when I draw a 
single window in Design Builder. When in DB I fill the whole surface 
of a wall with a transparent surface and I assign to it the features 
of frame and dividers, the frame is not labelled in E+ SubSurface 
section and the proper box is empty.
So, how can I control this factor? Is the frame considered anyway, 
even if it's not labelled, or the transparent SubSurface lost its 
frame features in the file export from DB?

Regards

Matteo



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/