[EnergyPlus_Support] Usage of chilled water return to supply another system

["miaoworld" <eric.yang@xxxxxxxxxxxxxx>]

Greetings,

I am not sure whether how to model this system correctly:
The chiller is supplying 42 F chilled water with 54 F return.  When 
outside air web bulb temperature is above 57 F, part of the return 
chilled water (54 F) is applied to another HVAC system as chilled 
water supply.

When outside air web bulb temperature is below 57 F, the return 
chilled water goes back to the chiller. 

My initial thought is to build a separate case for the condition 
above 57F, which specifies the returned chilled water as an inlet for 
another HVAC system.

Any suggestions would be greatly appreciated.

Thanks.

Eric (Miao)




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/