[EnergyPlus_Support] Design day is not meeting temperature setpoints?

["noelcrrl" <noelcrrl@xxxxxxxxx>]

All-

I am modeling a hospital with a VAV Reheat system in Chicago.  All 
zones are controlled with a thermostat with a dual setpoint and dead 
band.  The heating and cooling setpoints are 21.1 and 23.9, 
respectively.  All zones with the exception of two have met these 
conditions according to the ESO.  

The two zones that have not met these conditions are the office 
zones.  The office zones (4C and 5C) are core zones located on the 
4th and 5th floor and have one air handling unit that serves both 
zones (4C and 5C).  The thermostatic conditions, as mentioned above, 
are not met on the summer design day for these zones and I can't 
figure out what can be causing this issue.  

I have posted the file named A1C_4.zip for your reference.  Included 
are the idf, svg, err and eso files.  Thank you in advance for your 
help.

Noel




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/