[EnergyPlus_Support] very low zone/sys sensible Heating Energy

[dimitris drougas <dim_drougas@xxxxxxxxx>]

Dear Mike
I put internal mass and internal ganes(people, lights, etc.) and the annual zone/sys sensible Heating Energy became absolout zerrow for all conditional zones.
I put infiltration and vedilation air and very low(0,04-3 kwh/m^2) response in the annual Heating Energy.
I put overhung shading in the south wall and i have big response in annual cooling energy and very low response in the Heating Energy
The multiplier off the meadle zone's does no effect to the result of the anual Heating and Cooling Energy

                                     Dimitris Drougas


 
____________________________________________________________________________________
Cheap talk?
Check out Yahoo! Messenger's low PC-to-Phone call rates.
http://voice.yahoo.com

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/