Re: [EnergyPlus_Support] Window Air Conditioner Nodes

[Don Shirey <shirey@xxxxxxxxxxxx>]

Yes, Figure 87 for packaged terminal heat pumps is similar to the window 
air conditioner... except you would omit the DX heating coil and 
supplemental heating coil.

Suggest that you look at the example file "WindACAuto.idf" to see how to 
set the air nodes.

Don


alberto wrote:

>Dear Sir,
>
>I am trying to simulate a room with a window air conditioner and I am having problems to set the air nodes . I couldn´t find any scheme at the manual . The written explanation are there but I cound´t understand than quite well . I would like to know if the scheme for window air conditioner is similar to that shown in Fig. 87 in the input/output reference (this figure is related to packaged terminal heat pump).
>
>Thanks for any help.
>
>
>
>Sincerely,
>
>
>Alberto Hernandez Neto
>  
>



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/