[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Re: Zone controls and thermostats
I have recreated the data shown below, however, I do not know what is
causing it. I was able to get reasonable results by changing the cooling
set point to 24 and the heating set point to 23. You may have to adjust
these set points to a different value based on your climate. I will
forward this file to someone more able to diagnose the problem.
jeongch1004 wrote:
> Result is follow as shown.
>
> OutdoorDryBulb[C] /ZoneMeanAirTemp./ "Zone/SysSensibleLoadPredicted
> [W]"/"Zone/SysSensibleLoadtoHeatingSetpointPredicted[W]"/"Zone/Sys
> SensibleLoadtoCoolingSetpointPredicted[W]"
>
> 4.033333333/ 8.978055754/ 0/ -852.6063832/ 853.8331622//
> 4.525/ 8.966831774/ 0/ -851.6064025/ 852.8752779//
> 4.283333333/ 8.950181543/ 0/ -851.582205/ 853.2167353//
> 4.083333333/ 8.933127341/ 0/ -851.9443016/ 853.5446422//
> 3.883333333/ 8.916201903/ 0/ -852.2052171/ 853.8277879//
> 3.625/ 8.898818409/ 0/ -852.5261543/ 854.190358//
> 3.383333333/ 8.881014555/ 0/ -852.9178424/ 854.6223443//
> ./ ./ ./ ./ .//
> ./ ./ ./ ./ .//
> Continue as similar pattern
> I selected "Dual setpoint-", heating setpoint is 20(C), cooling
> setpoint is 26(C)
> Zone Mean Air temperature range from 8 to 35, but "Zone/Sys Sensible
> Load Predicted[W]" indicated 0 (all), Zone/Sys Sensible Load to
> Heating
> Setpoint Predicted[W]" is negative value(all), Zone/Sys Sensible Load
> to Heating Setpoint Predicted[W]" is positive value(all).
> Why did I get result like this?
>
>
--
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu
UCF - From Promise to Prominence: Celebrating 40 Years
[Non-text portions of this message have been removed]
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/