Re: [EnergyPlus_Support] Simplified Duct Leakage Model?

[Fred Buhl <wfbuhl@xxxxxxx>]

Sorry Noel. To use SDLM you must have a return plenum.

Fred Buhl

noelcrrl wrote:
> All-
>
> I have completed the construction of my building model in E+.  I was 
> planning to use the simplified duct leakage model (SDLM) to simulate 
> duct leakage, however, I was unable to do so because I did not create a 
> return plenum in my original construction of the model.  Creating a 
> return plenum seems extremely time consuming due to the fact that 
> coordinates need to be entered to define the plenum and the air loops 
> have to be adjusted to incorporate the plenum.  The alternative is 
> creating an air flow network, but that also seems to be a very involved 
> process.  Is there a way that I can simulate duct leakage with my 
> current model (building w/o a return plenum) without the significant 
> time investment?  Ideally, I would like to use the SDLM without 
> creating a return plenum.  Thanks in advance for your help.
>
> Noel
>
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
>
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
>  
> Yahoo! Groups Links
>
>
>
>   


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/