[EnergyPlus_Support] Report table predefined problem

["Emanuel Sá" <sa.emanuel@xxxxxxxxx>]

Dear all

I notice that for several times, the heating energy and cooling energy
presented in the reported table predefined for a annual simulation
didn't match the sum of the cooling and heating energy for the
individual zones. This has happened several times. In one other
simulation using an 100% efficiency boiler, the heating energy
reported in the end use report (from the predefined reports) was about
4 times more than the sum of the heating energy reported for each
conditioned room.

Is there any known problem with this report? Or am I making any king
of confusion with this report?

Best regards

Emanuel Sá


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/