[EnergyPlus_Support] SVG or system problems in the combination of Unit heater and VAV system?

["tjutw" <tjutw@xxxxxxxxx>]

Dear All,

I want to combine the Unit heater and VAV system. Two original files
are  energyplus examples (unitheater.idf and
VAVSingleDuctConstFlowBoiler.idf). I mainly  want to test the
combination method of two systems. So, Just the heating system is added.  
But from the SVG file created by Energyplus, system of north zone has
some problems. There are no error messages about north zone. 
I am not sure it is because of SVG display problem or the combination
method of two system I used.  Amaya 9.54 is used to display HVAC
diagram file. I have uploaded the file.

Thanks a lot.

Tju Tw



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/