[EnergyPlus_Support] Re: Heat Exchanger Outlet Control

["asheaffe" <sheaffer@xxxxxxx>]

I have figured out that it has something to do with the frost 
control.  When I run the file without the frost control, everything 
works fine.  However, when I try to switch to exhaust minimum 
temperature as the frost control strategy, the simulation crashes 
without any warnings.

Any ideas?

Andrew
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "asheaffe" <sheaffer@...> 
wrote:
>
> I have posted a file (B3C_6.zip) in which I am not able to control 
the 
> outlet of the Heat Exchanger:Generic object.  I am getting 
overheating 
> which is causing my cooling coils to come on.  I have the outlet 
temp 
> control set up and it matches the economizer lower limit.  Any ideas?
> 
> Thanks,
> 
> Andrew
>




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/