[EnergyPlus_Support] Internal Radiant Heat Distribution

["Micheal" <mhamilton3312@xxxxxxxxxxxxx>]

I am working on a simple single room single zone building with no 
windows and purchased air. Also, I have some internal equipment load 
but no latent heat. It seems as if EPlus sums total internal load 
convective heat gain with convection heat gain to air of the other 
surfaces to produce Purchased Air Sensible Cooling variable.

 My question is about the internal radiant heat gain. I would guess 
that this heat would be distributed over the inside surfaces of the 
model in some way. The problem is that I do not see an inside surface 
variable for radiant heat to verify this. Any suggestion or comments 
would be appreciated. 

I could upload my model if you would like to see specifics.

Thanks,
Mike

PS: I have looked through the Manuals but have not found an answer to 
this in them.



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/