Re: [EnergyPlus_Support] Question about the surface output variables

[Linda Lawrie <linda@xxxxxxxxxx>]

The documentation is searchable from the main menu PDF,

As it says in the Input Output Reference:

Output variables applicable to opaque heat 
transfer surfaces (FLOOR, WALL, ROOF,
DOOR). Note ? these are advanced variables ? you must read the descriptions and
understand before use ? then you must use the 
Diagnostics object to allow reporting.
Zone,Average,Opaque Surface Inside Face Conduction[W]
Zone,Average,Opaque Surface Inside Face Conduction Gain[W]
Zone,Average,Opaque Surface Inside Face Conduction Loss[W]
Zone,Average,Zone Opaque Surface Inside Face Conduction Gain[W]
Zone,Average,Zone Opaque Surface Inside Face Conduction Loss[W]
Zone,Average,Opaque Surface Inside Face Beam Solar Absorbed[W]

And under the Diagnostics object:
DisplayAdvancedReportVariables ? use this to be 
able to use the ?Opaque Surface Inside
Face Conduction? ? the name may be misleading to 
some. If you put in this field, then you will
be able to report on this variable.


So, you need to add Diagnostics, 
DisplayAdvancedReportVariables; to get this variable reported.


Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/