[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] warning about " Temperature out of range (too high) for glycol specific heat"



Hi, 

I am sure that there is no glycol in my model. I have searched it
using  Notepad. But this warning message always appears,
 ** Warning ** GetSpecificHeatGlycol: Temperature is out of range (too
high) for glycol specific heat ** 
**   ~~~   ** ..Temperature=1675.85 Occurrence info=CALGARY INT'L AB
CAN WYEC2-B-25110 WMO#=718770, 04/05 06:00 - 07:00

 *************  ** Warning ** GetSpecificHeatGlycol: Temperature out
of range (too high) for glycol specific heat
   *************  **   ~~~   **   This error occurred 4318 times.

I just found that sometimes hot water loop temperature is very high
(200 or 1500 degree C ) when  there is no flow rate.  

Anyone can help me out.
Thank you in advance.

Tj Ywh




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/