[EnergyPlus_Support] Zone Sizing output file

["jvd2pe" <jvd2pe@xxxxxxx>]

When running a design-day-only simulation for the purpose of checking
zone sizing, the *****cZsz.csv file has the last two lines labelled
"Peak" and "Peak Vol Flow".  For the mass flow rate columns, these
values differ, and the "Peak Vol Flow" value is always less than the
"Peak".  What is the definition for these two values? (p.s., I have
NOT assigned a  value for the "heating max air flow".)
Thanks in advance!



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/