[EnergyPlus_Support] Temperature and humidity setpoints

["lorenzomattarolo" <lorenzomattarolo@xxxxxxxx>]

Dear E+ support,

I'm analysing an office building.
The temperature of the office is controlled by a radiant system with
panels on the ceiling.
Besides an air system supplies primary air at a temperature of 16°C
and at variable humidity. It varies the content of humidity according
to a setpoint of 50% H.R. inside the office.

I'm modelling this office with E+ by a system with radiant panels
which control the temperature of the zone 
(by means of "zone control thermostatic" with "heating/cooling single
setpoint")

How can I model this air system?
Is there a way to control the temperature of the zone by the radiant
system and the humidity of the zone by an air system?

Many thanks,

Lorenzo







The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/