[EnergyPlus_Support] I add a window, but the temperature inside the building doen't change

[Daniel Solís <danielsolis79@xxxxxxxxxxxx>]

I'm newbie in e+, so I started simulating a shoebox-shaped room. Then, 
I added a window (single 6mm clear glass, 1m2) facing to the south. 
When I compare the temperature in the inside with and w/o the window, 
it's almost the same (few hundreths of difference), which doesn't make 
sense.

I uploaded the file, it's Odon3.idf


Thanks

Daniel Solís





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/