[EnergyPlus_Support] LED lighting simulation

["Qian Li" <qianl@xxxxxxxxxxxxx>]

Hi everyone,

I am working on the energy simulation of LED (Light-emitting diode) light, I have some questions of
setting the internal gain caused by LED light, the help documents have the table of light internal
gain source breakdown factors of radiant, visible and converted energy for traditional light
sources, however, there is not any information of LED light. And because most of the heat passed out
by LED light is from the back of luminaries so the setting cannot be the same as for other general
light sources.  Does anyone have any ideas of the setting of internal gain distribution of LED
light? or know any related literature about it? Any information will be appreciated. 

Thanks

Li

_______________
Qian Li  
Research Asistant
BArch MArch Phd Candidate
Room T03, Bute Building 
Welsh School of Architecture 


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/