[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] ECOTECT export to EPLUS



hi,

First, good luck with the transfer process, there are also lots of issues beside the shading
elements.  You can put all the shading devices into 'outside' zone and then transfer. All objects in
'outside' zone will be considered as detached shading. 

Hope it helps

Li

_______________
Qian Li  
Research Asistant
BArch MArch Phd Candidate
Room T03, Bute Building 
Welsh School of Architecture 

>>> "brandao_nuno" <ncostab@xxxxxxxxx> 31/10/2007 15:12 >>>
Dear All,

Ím writing to know if anyone can help me with some issues about the
ECOTECT export to EPLUS. Ím having problems with shading device
export. It seems that ECOTECT doesńt have its own element type. 

While this creates no problem in Ecotect, it will create a problem
when we export the model to EnergyPlus. Shading device is expected to
have its own element type, and if it is attached to a wall, the
dimension and location use the wall as reference point.

Its painful to have to change the location of every shading device in
a building, especially if we have many windows with shading device
attached to it. Any thoughts about this, especially to make the export
process less painful.

Is there any way to garantee the correct export procedure?

Thanḱs
Regards
Nuno Brandão 



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/