Re: [EnergyPlus_Support] ECOTECT VS DESIGNBUILDER

["Nuno Brandao" <ncostab@xxxxxxxxx>]

Dear Ery.

Thank you very much for your opinion, it was very clarifying, I´ve decided
to use DesignBuilder. However after modelling the geometry, I always have
the need to export the idf file, because as you refered, DesignBuilder does
not have flexibility when concerning required outputs. However, I always
have supplemental work, identifying and renaming zones, equipment,
reconstructing walls, etc. I would like to ask if you could give me some
guide lines, based in your own experience and methodology, in which concerns
exporting the idf file, and work with it in EnergyPlus, that could help me
saving some time with the modelling process.

Again, thank you very much
Regards
Nuno Brandão


[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/