[EnergyPlus_Support] Loads Initialization did not Converge

[Rongxin Yin <rongxinyin@xxxxxxxxx>]

Hi All,
I am simulating one office building and get the results as follow. The err file shows that the Loads Initialization did not Converge.  The default Temperature Convergence Tolerance Value is just 1 (deltaC). and i check that Max Temp Comparison=2.46 vs Temperature Convergence Tolerance=1.00 - Fail Convergence. It is just a warning, but i want to remove this warning from my model. How can i do it? Which field should i check?

Thanks lot in advance!

Rongxin


      ____________________________________________________________________________________
Get easy, one-click access to your favorites. 
Make Yahoo! your homepage.
http://www.yahoo.com/r/hs 

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/