[EnergyPlus_Support] RH out of range

[Justin Wong <justinw@xxxxxxxxxxxxxxx>]

Hi all,

I am simulating an office building using the unitary compact HVAC object 
and I have got the following warnings.

** Warning ** Calculated Relative Humidity out of range (PsyRhFnTdbWPb)
   **   ~~~   **  Occurrence info=BRISBANE - AUS IWEC DATA WMO#=945780, 
01/02 07:30 - 07:31
   **   ~~~   **  Dry-Bulb= 18.56 Humidity Ratio= 1.397E-002 Calculated 
Relative Humidity (fraction)= 1.04
   **   ~~~   ** Relative Humidity being reset to 1.0

Any idea how to get rid of these warnings? Any input will be appreciated.

Best Regards,
Justin



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/