[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] A Question About FANCOIL:4PIPE



Dear EnergyPlus Support Team:
   I am simulating a building using fancoil for air-conditioning and my 
IDF is just like the example file "FancoilAutosize".I want to know how 
the Fancoil:4pipe modulates the outside air flow rate. 
   How is the maximun outside air rate autosized?Is it just determined 
by ZONESIZING?Is the outside air flow aways set to the autosized 
maximun outside air flow rate? 
   I want to use outside air for free cooling when the outdoor 
temperature is lower than the zone air set point.Am I supposed to creat 
a CONTROLLER:OUTSIDE AIR for the fancoil out side air mixer?Wheather or 
not the FANCOIL;4PIPE  modulates the outside air flow in a complex way 
just like CONTROLLER:OUTSIDE AIR?
   Thanks for your help!



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/