[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Confusion over Fan in AirFlow Network
Merry Christmas to everyone,
i am starting AirFlow network and have decided to take one step back
by neglecting any fan in my modelling of two classrooms with a
common space above the ceilings under the roof. As suggested by
Michael Witte about half a year ago, i should model this space as a
zone, the attic, so i have a 3 zone building.
Can someone advise me which of the AirFlow Network and/or
Infiltration objects to use if i just want to see the effect of the
air in the attic on the room and surface temperatures.
Around midday, as the corrugated metal roof heats up the air in the
attic, the air would flow out through the openings between the
corrugated roof and its horizontal supports at the eaves. There is
also a small gap underneath the door to each room.
Many thanks and Happy new 2008 to one and all.
ooi
<gu@...> wrote:
>
> Ooi:
>
> I don't have suggestiongs how much attic infiltration is. You may
try to
> find values in other publications.
>
> The AirflowNetwork model requires an air primary loop. Any coils
and fan
> have to be a part of the loop. The allowed coil types are listed
in the
> Energy+.idd and Input Output Reference. An example input file of
> AirflowNetwork_Multizone_House.idf uses
UNITARYSYSTEM:HEATPUMP:AIRTOAIR. The
> unitary system uses allowed coil types. The answer to your
question is that
> if a compact unitary system uses allowed coil types, it should
work.
>
> Hope my answers help.
>
> Best regards,
>
> Lixing
> ----- Original Message -----
> From: "ooikoonbeng2004" <ooi_kb3@...>
> To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
> Sent: Wednesday, July 04, 2007 12:36 AM
> Subject: [EnergyPlus_Support] Re: Confusion over Fan in AirFlow
Network
>
>
> > Lixing,
> >
> > Many thanks for how to disable the AirFlow Network.
> >
> > i shall try Infiltration first. Any adice on the variables to use
> > for this object if the infiltration to the attic, space between
the
> > horizontal overhang ceilings and the sloping roof, is only
through
> > the corrugations in the roofing metal sheets as they are nailed
to a
> > horizontal wood?
> >
> > Meanwhile, is Compact HVAC:System:Unitary supported if i use the
> > choice as MULTIZONE WITH DISTRIBUTION or MULTIZONE WITH
DISTRIBUTION
> > ONLY DURING FAN OPERATION in the AirflowNetwork Control field in
the
> > AirflowNetwork Simulation object?
> >
> > regards,
> > ooi
> > Meanwhile can you let me know if --- In
> > EnergyPlus_Support@xxxxxxxxxxxxxxx, Lixing Gu <gu@> wrote:
> >>
> >> Ooi:
> >>
> >> It seems the input file does not specify a fan as
Zone2WindACFan,
> > so that
> >> the first error message occurs (GetFanIndex: Fan not
> > found=Zone2WindACFan).
> >> In other words, Zone2WindACFan is not listed in fan index. You
may
> > define
> >> the fan in the AIRFLOWNETWORK:DISTRIBUTION:COMPONENT CONSTANT
> > VOLUME FAN
> >> object. Since the fan is not listed in the fan index, the prgram
> > can not go
> >> any further.
> >>
> >> My suggestion is to disable the AirflowNetwork model first to
see
> > whether
> >> you can eliminate the first error or not. The model disablement
is
> > to use
> >> the choice of NO MULTIZONE OR DISTRIBUTION in the AirflowNetwork
> > Control
> >> field in the AirflowNetwork Simulation object. If you still have
> > problems,
> >> please upload the file. I will take a look.
> >>
> >> By the way, Window AC is not supported for the time being if you
> > use the
> >> choice as MULTIZONE WITH DISTRIBUTION or MULTIZONE WITH
> > DISTRIBUTION ONLY
> >> DURING FAN OPERATION in the AirflowNetwork Control field in the
> >> AirflowNetwork Simulation object
> >>
> >> Thanks.
> >>
> >> Lixing Gu
> >>
> >> ----- Original Message -----
> >> From: "ooikoonbeng2004" <ooi_kb3@>
> >> To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
> >> Sent: Monday, July 02, 2007 2:06 AM
> >> Subject: [EnergyPlus_Support] Confusion over Fan in AirFlow
Network
> >>
> >>
> >> > Confusion over Fan
> >> >
> >> >
> >> > Hello everyone,
> >> >
> >> > i am starting to use the AirFlow Network with only the
> >> > MultiZone:Surfaces referring to the SIMPLE house example.
> >> >
> >> > From the .err file, a zone needs two surfaces and i have
added a
> >> > door to each zone. So, correct me if i am wrong, the air in
the
> >> > AirFlow Network goes through ceiling crack/leakage and door
> > leakage.
> >> >
> >> > As i am only studying the thermal aspects of the building
> > envelop, i
> >> > do not use a Direct air or fan as in the Simple House example.
> > But i
> >> > have a Window AirConditioner in the second zone.
> >> >
> >> > The messages in .err file, includes:
> >> >
> >> > GetFanIndex: Fan not found=Zone2WindACFan
> >> > GetAirflowNetworkINput: The fan type defined in
> >> > AIRFLOWNETWORK:DISTRIBUTION:COMPONENT CONSTANT VOLUME FAN =
> >> > ZONE2WINDACFAN is not allowed etc.
> >> >
> >> > The 'Fan' in the error message can only refer to the fan in
> > Window
> >> > AC. But how do i enter the index of this fan or overcome the
> > errors
> >> > in the .err file?
> >> >
> >> > kind regards,
> >> > ooi
> >> >
> >> >
> >> >
> >> >
> >> > The primary EnergyPlus web site is found at:
> >> > http://www.energyplus.gov
> >> >
> >> > The group web site is:
> >> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >> >
> >> > Attachments are not allowed -- please post any files to the
> > appropriate
> >> > folder in the Files area of the Support Web Site.
> >> >
> >> > EnergyPlus Documentation is searchable. Open
EPlusMainMenu.pdf
> > under the
> >> > Documentation link and press the "search" button.
> >> >
> >> > Yahoo! Groups Links
> >> >
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> >
> > The primary EnergyPlus web site is found at:
> > http://www.energyplus.gov
> >
> > The group web site is:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> > Attachments are not allowed -- please post any files to the
appropriate
> > folder in the Files area of the Support Web Site.
> >
> > EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf
under the
> > Documentation link and press the "search" button.
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/