[EnergyPlus_Support] ATU - Heat recovery with no mixture

["anarui.oliveira" <anarui.oliveira@xxxxxxxxx>]

Hello again.

If in the Compact HVAC:System:VAV I set:
- Heat recovery to sensible
- both the Fan Max and Min Flow rate, and both the Max and Min Outside 
Air Flow rate to the same value,
- and Outside Air Control Type to fixed minimum
do I get a system that exhausts to the outside all the return air of 
the ATU, recirculating none to the inside and substituting it by 
outside air, at a fixed rate, but first using the return air to do 
sensible heat recovery?

Which output variables should I look at more closely to check this 
behaviour?

Thanks,
Ana Rui.



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/