[EnergyPlus_Support] Hot Water Loop Temperatures

["anarui.oliveira" <anarui.oliveira@xxxxxxxxx>]

When I add internal gains to may model, (which as a chilled and a hot 
water loop, served by chiller and boiler, respectively), the 
Temperatures at the inlet and outlet of the hot water loop (and 
boiler), in a summer week, when the boiler is off (I checked!) start 
rising steadily, well above the nominal boiler temperature and the zone 
temperatures (even those of the uncontrolled zones).
NO similar effect occurs in the chilled water loop, nor in the winter 
nor in the summer.
I can't see the relationship behind this effect and I'm worried it 
reveals some problem with the modelling.
Can anyone help me?

Thank you,
Ana Rui



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/