Re: [EnergyPlus_Support] Ventilation box

[Don Shirey <shirey@xxxxxxxxxxxx>]

How is the ventilation box controlled?

You might consider using the Packaged Terminal Air Conditioner (PTAC) 
for the "ventilation box".... just schedule the cooling coil OFF for the 
entire simulation period.


Ricardo Miranda wrote:
> Hello,
>
>    I'm simulating a room that has two systems. One is a individual zone
> split with no fresh air and the other is a ventilation box with heating (by
> electric resistence) that supplies the fresh air need. I have two questions:
>
> 1-It´s possible to simulate this using the COMPACT HVAC for the split and
> using other system for the ventilation box?
> 2-What system can I use to model the ventilation box?
>
> Regards,
> Ricardo Miranda
>   


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/