Re: [EnergyPlus_Support] Flow mismatch with LOW:TEMP:RAD:CONSTFLOW

["Michael J. Witte" <mjwitte@xxxxxxxx>]

The injection flow in the warning is reported in kg/s.  I expect that it is 
very small compared to the total flow in the radiant panels.  If so, you can 
ignore the warnings.  We will fix this for the next release.

Mike


On 23 Jan 2008 at 14:46, massimiliano_scarpa wrote:

> Dear You,
> 
> I'm analysing an office building with radiant panels on the ceiling for 
> cooling and heating.
> I'm using LOW:TEMP:RAD:CONSTFLOW.
> The simulation ends without any severe errors, but many warnings always 
> come up due to "flowmismatch problem".
> 
> Could you tell me how I should fix this problem?
> Does it affect the results in a considerable extent?
> 
> Many thanks
> 
> Max
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the
> Documentation link and press the "search" button.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/