[EnergyPlus_Support] Flow mismatch with LOW:TEMP:RAD:CONSTFLOW

["massimiliano_scarpa" <massimiliano_scarpa@xxxxxxxx>]

Dear You,

I'm analysing an office building with radiant panels on the ceiling for 
cooling and heating.
I'm using LOW:TEMP:RAD:CONSTFLOW.
The simulation ends without any severe errors, but many warnings always 
come up due to "flowmismatch problem".

Could you tell me how I should fix this problem?
Does it affect the results in a considerable extent?

Many thanks

Max





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/