[EnergyPlus_Support] horizontal openings

[ROTRAT Leelatanon <copper_one_oxide728@xxxxxxxxx>]

My objective is to simulate the building to find out how temperature will reach if i put little amount of cooling load in the building, but only natural ventilation is needed
  
I am simulating the buiding with some horizontal openings which I defined them in subsurface. As i read the documentation about AirflowNetwork, it lead me to example AirflowNetwork3zVentAutoWPC. After input my own data i found that horizontal openings cannot be well used in AirflowNetwork:Multizone:Surface.
   
  Is there any other possible way to fix this, I need to study the amount of air that circulate through these horizontal openings

  I have attached my .idf for your comment and suggestion
   
  thank you in advanced

       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/