[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] An error when applied the UCSD Displacement Ventilation Module
This type of error will trip on the first zone that goes past the limit, so it
is not surprising that fixing one zone will lead to failure in another similar
zone. If you delete all of the room air models, does the simulation run
normally?
Mike
On 4 Feb 2008 at 12:40, Zhen Tian wrote:
> Thanks, Mike.
>
> Actually this error only appears when I add the UCSD DV module into the zones.
> There is no problem when I use the UCSD UFAD module or use conventional mixing
> module.
>
> I tried to delete the RoomAir Model for the zone with errors. Then, another zone
> appears the same error and causes the simulation to crash.
>
> Thanks.
>
> Regards,
>
> David
>
>
>
> "Michael J. Witte" <mjwitte@xxxxxxxx> wrote: It is
> difficult to say without more information. My guess is that there is
> something wrong with the ventilation inputs and the zone is overheating from
> solar or internal gains. Did the simulation progress far enough to report any
> output? Perhaps you can report zone air and surface temperatures and determine
> more about the problem.
>
> Mike
>
> On 29 Jan 2008 at 13:12, Zhen Tian wrote:
>
> > Dear all,
> >
> > I modeled one floor of a building with displacement ventilation builidng. I
> used > the UCSD Displacement ventilation module in my simulaiton model. Then I
> got the > following warnings and error. > > "Warning ** Calculated Relative
> Humidity out of range (PsyRhFnTdbWPb) > ** ~~~ ** Occurrence
> info=CALGARY INT'L AB CAN WYEC2-B-25110 > WMO#=718770, 01/02 05:00 - 05:10
> ** ~~~ ** Dry-Bulb= -333.04 Humidity > Ratio= 1.000E-005 Calculated
> Relative Humidity (fraction)= 844.67 ** ~~~ > ** Relative Humidity being
> reset to 1.0 > ... > > Severe ** Temperature out of bounds (219.18) for
> surface=SUBOBJ:0468 > ** ~~~ ** in Zone=Z106 > ** ~~~ **
> Occurrence info=CALGARY INT'L AB CAN WYEC2-B-25110 > WMO#=718770, 01/02
> 05:05 - 05:06 ** ~~~ ** A temperature out of bounds > problem can be
> caused by several things. The user ** ~~~ ** should check > the weather
> environment, the level of internal gains with respect ** ~~~ > ** to the
> zone, and the thermal properties of their materials among other > things. **
> ~~~ ** A common cause is a building with no thermal mass -- > all
> materials with ** ~~~ ** Regular-R definitions." > > But I did not use
> reguar-r for building materials and construciton. In addition, > the model
> without the UCSD DV module has not problem. > > Does someone has the same
> experiences before and can tell me how to resolve this > issue? > > Thanks a
> lot in advance. > > Regards, > > David > > > >
> --------------------------------- > Looking for last minute shopping deals?
> Find them fast with Yahoo! Search. > > [Non-text portions of this message have
> been removed] > > > > The primary EnergyPlus web site is found at: >
> http://www.energyplus.gov > > The group web site is: >
> http://groups.yahoo.com/group/EnergyPlus_Support/ > > Attachments are not
> allowed -- please post any files to the appropriate folder > in the Files area
> of the Support Web Site. > > EnergyPlus Documentation is searchable. Open
> EPlusMainMenu.pdf under the > Documentation link and press the "search" button.
> > > Yahoo! Groups Links > > > > >
>
> ========================================================
> Michael J. Witte, GARD Analytics, Inc.
> EnergyPlus Testing and Support
> EnergyPlus-Support@xxxxxxxx
>
>
>
>
>
>
> ---------------------------------
> Never miss a thing. Make Yahoo your homepage.
>
> [Non-text portions of this message have been removed]
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
>
> EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the
> Documentation link and press the "search" button.
>
> Yahoo! Groups Links
>
>
>
>
>
========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support
EnergyPlus-Support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/