[EnergyPlus_Support] Purchased air problems

["marziasedino" <marziasedino@xxxxxxxx>]

Hi there,

I am having some problems in using the "PurchasedAir" in one of my E+ 
model, apparently I get unreasonable outputs. 
I analysed one of the E+ simplest examples "PurchAirTable" and realized 
it shows the same problem: if you run it and check the Mean Air 
temperature of the zones you can see the values are too high (up to 30°
C) considering the outdoor temperature during the winter season. As the 
internal heat gains are reasonable and the weather file I used is the 
Venice one (where the solar heat gains are not high enough to justify 
such a trend) I wonder if I am forgetting to consider some other 
variable or if there is a problem in the model itself?.
Could you please let me know what you think?

Thanks

Marzia



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/