[EnergyPlus_Support] Example File Generator

["ray.worthen" <ray.worthen@xxxxxxx>]

All,

I used the Example File Generator on the Eplus website to model a
single story,  165 x 85 Ft building with 15 ft walls.  The files that
came back indicated correct surface areas with R13 walls and R15 roof.
The infiltration rate was .5 air changes per hour. The model auto
sized the heating equipment at only 11,900 Btuh with cooling at 17
Tons.  This doesn't fit what you would expect.   Infiltration alone
should be 100,000 Btuh.  I have looked for potential errors that would
explain the small sizing but I honestly can't see it. Weather station
is right.  What could I be missing?



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/