[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: "Loads Initialization did not Converge" - Problem
I also tried to run a annual simulation but it resulted in some very
unusual errors. I´ve checked the idf file but I´m note able to figure
out what´s hapenning. I would like to ear your opinions.
Thanks
Nuno Brandao
ERROR MESSAGE
-----------------------
** Warning ** The following Report Variables were requested but not
generated
** ~~~ ** because IDF did not contain these elements or
misspelled variable name -- check .rdd file
************* Key=*, VarName=ZONE MEAN AIR TEMPERATURE,
Frequency=Hourly
************* Key=*, VarName=PURCHASED AIR HEATING RATE,
Frequency=Hourly
************* Key=*, VarName=PURCHASED AIR TOTAL COOLING RATE,
Frequency=Hourly
** Warning ** The following lines are "Orphan Objects". These
objects are in the idf
** ~~~ ** file but are never obtained by the simulation and
therefore are NOT used.
** ~~~ ** See InputOutputReference document for more details.
************* Object=BUILDING=MODELO BOMBARRAL
** ~~~ ** Object=INSIDE CONVECTION ALGORITHM
** ~~~ ** Object=OUTSIDE CONVECTION ALGORITHM
** ~~~ ** Object=SOLUTION ALGORITHM
** ~~~ ** Object=SHADOWING CALCULATIONS
** ~~~ ** Object=ZONE VOLUME CAPACITANCE MULTIPLIER
** ~~~ ** Object=MATERIAL:REGULAR=1_1_10004
** ~~~ ** Object=MATERIAL:REGULAR-R=11_1_400
** ~~~ ** Object=MATERIAL:WINDOWGLASS=10000
** ~~~ ** Object=MATERIAL:WINDOWGAS=11002
** ~~~ ** Object=MATERIAL:WINDOWBLIND=20001
** ~~~ ** Object=CONSTRUCTION=1
** ~~~ ** Object=ZONE=WC PISO 0 BAIXO
** ~~~ ** Object=SURFACEGEOMETRY
** ~~~ ** Object=SURFACE:HEATTRANSFER=S_WC PISO 0 BAIXO_0_0_0
** ~~~ ** Object=SURFACE:HEATTRANSFER:SUB=W_WC PISO 0
BAIXO_7_0_0_0_0
** ~~~ ** Object=SURFACE:SHADING:DETACHED:BUILDING=HIPERMERCADO
- PALA HORIZONTAL ENTRADA - SURFACE 1 (1)
** ~~~ ** Object=WINDOWSHADINGCONTROL=1002
** ~~~ ** Object=WINDOWFRAMEANDDIVIDER=1
** ~~~ ** Object=SCHEDULETYPE=ANY NUMBER
** ~~~ ** Object=SCHEDULE:COMPACT=ARMAZENS EQUIP
** ~~~ ** Object=PEOPLE=PESSOAS VENDAS
** ~~~ ** Object=LIGHTS=ILUMINAÇAO VENDAS
** ~~~ ** Object=OTHER EQUIPMENT=CENTRAL FRIO
** ~~~ ** Object=EXTERIORLIGHTS=ILUMINAÇAO EXTERIOR
** ~~~ ** Object=INFILTRATION=OA VENDAS
** ~~~ ** Object=REPORT:TABLE:STYLE
** ~~~ ** Object=REPORT:TABLE:PREDEFINED=ALL SUMMARY
** ~~~ ** Object=REPORT:TABLE:MONTHLY=ZONE HEATING SUMMARY
** ~~~ ** Object=DUAL SETPOINT WITH DEADBAND=TERMOSTATO GERAL
DUAL SP CONTROL
** ~~~ ** Object=ZONE CONTROL:THERMOSTATIC=VENDAS THERMOSTAT
** ~~~ ** Object=CONTROLLED ZONE EQUIP CONFIGURATION=VENDAS
** ~~~ ** Object=ZONE EQUIPMENT LIST=VENDAS EQUIPMENT
** ~~~ ** Object=PURCHASED AIR=VENDAS PURCHASED AIR
************* EnergyPlus Completed Successfully-- 2 Warning; 0
Severe Errors; Elapsed Time=00hr 00min 1.23sec
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/