[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] best way to export from Design Builder to E-Plus



Hi All,

 

It would be great if you could share your experience in exporting idf
files from design builder to Energy Plus especially for the set up of
HVAC systems. 

 

I have a model with a large number of zones.

 

For a beginner, is it a good idea to set up "compact type"HVAC systems
in Designbuilder and then modify them in Energy plus to add
components/controls etc. OR is it a better way to try and model on the
lines of s suitable example file from scratch in E Plus?

 

Please help.

 

Minu Agarwal

CoSA, Buro Happold Consulting Engineers PC
100 Broadway 
New York, NY 10005
USA
Telephone:  +1 212 334 2025
Fax: +1 212 334 5528

 



This message has been scanned by MailController - www.MailController.altohiway.com


[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/