[EnergyPlus_Support] cooling load

["neslihanturkmenoglu" <neslihanturkmenoglu@xxxxxxxxx>]

hi 
I included a purchased air system to my simulation in order to make 
cooling load calculation.I arranged the sepoint cooling temperatures 
changing 23 in day time and 30 night time.And when the zone mean 
temperature is over these setpoints cooling load occurs. I made the 
simulation with purchased and without purchased to compare the results. 
In the outputs zone temperatures are seen as set to 23 or 30 when 
needed. But I don't understand why my temperatures below these ranges 
also change(very little but changes)? 
thank you very much
nesli



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/