[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] pipe losses



Hi Everyone,

 

I am trying to set the loss from the pipes to 0.00%. Do you think it
would be a good idea to set the ambient temperature for the pipe to the
fluid temperature to eliminate losses? Does anyone know of a better way
of eliminating piping losses from the equation?

It would be great if someone from the EnergyPlus team could respond.

 

Many Thanks

Minu Agarwal

CoSA, Buro Happold Consulting Engineers PC
100 Broadway 
New York, NY 10005
USA
Telephone:  +1 212 334 2025
Fax: +1 212 334 5528

 



This message has been scanned by MailController - www.MailController.altohiway.com


[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/