[EnergyPlus_Support] minimum air flow

["Minu Agarwal" <Minu.Agarwal@xxxxxxxxxxxxxxx>]

Hi Everyone,

 

I am trying to set the minimum air flow in a zone to be a function of
the zone area. However under the Air Distribution Units, it can only be
set as a fraction of the maximum air flow. Both Appendix G and ECB
method require the minimum air flow to be 0.4cfm/sqft. Could some one
please tell how this could be set up?

Thanks

 

Minu



This message has been scanned by MailController - www.MailController.altohiway.com


[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/