[EnergyPlus_Support] Heating coil sensible part-load ratio

["JV Dirkes II" <jvd2pe@xxxxxxx>]

Dear EPlus Forum,

I'd like some help understanding the error below.  I don't know what a
"sensible part load ratio" refers to for a COIL:GAS:HEATING object
within a Furnace:HeatCool object. It sounds like the sensible heat
ratio for a DX cooling coil, but that makes no sense for heating....

   ** Warning ** Heating coil control failed to converge for
Furnace:HeatCool:AH_03
   **   ~~~   **   Iteration limit exceeded in calculating heating
coil sensible part-load ratio.
   **   ~~~   ** Sensible load to be met by heating coil = 107013.56
(watts), sensible output of heating coil = 107158.23 (watts), and the
simulation continues.

Thanks!



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/