[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Compact System heat recovery and Ventilation between zone



Hello,

In a model I've got a unitary single zone system with heat recovery
and I try to model air flow between zones (not calculated).
To easily set theses air flows I use VENTILATION objects.

For a winter simulation, my totals are not coherent. I mean that
loses+internal loads+heating (sensible zone/syst) < 0 (very negative).
But temperatures are exactly what I want.
If I don't use Ventilation, the equation is near to zero (probably
thermal mass effect).

I wonder if I have well understood what to add with what!

Is zone sensible heating must be completed by another output (recovery)?
In zone heat balancing, is VENTILATION occurs before or after air is
extracted to the heat recovery?
Same question for supply air, is it added before or after Ventilation?

Thank you,
Laurent


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/