[EnergyPlus_Support] Induction Ratio

["Matthew Flannery" <matthew.flannery@xxxxxxxxxxxxxxx>]

I'm looking to Dru or Michael for this one:

I have been working on a model using chilled beams, and have been using
induction units as the most similar system E+ offers.  But once I got
into it I realized that the particular brand of chilled beams has
inductions ratios close to 3:1 (300 cfm induced for every 100 cfm
primary air), while E+ has a maximum induction ratio of 1.  Is there
anyway to overclock this?  Or perhaps just as something to keep in mind
for the next edition?

Thanks

Matthew Flannery, LEED A.P.
Mechanical Engineer
Buro Happold Consulting Engineers, PC
100 Broadway 
New York, NY 10005
USA


This message has been scanned by MailController - www.MailController.altohiway.com

------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/