[EnergyPlus_Support] Convergence Error - Warning - Exhaust fan (using HVAC Compact Object)

[André Lopes <andr_lopes2000@xxxxxxxxx>]

Dear E Plus Team
In my error report the following messages appeared:
    What is the meaning? Is this important for the simulation results?
  ** Severe  ** Loads Initialization did not Converge (CheckWarmupConvergence) after 25 warmup days.
   **   ~~~   ** ..Environment=COIMBRA - PRT IWEC DATA WMO#=085490
   **   ~~~   ** ..Max Temp Comparison=3.63E-002 vs Temperature Convergence Tolerance=2.00E-002 - Fail Convergence
   **   ~~~   ** ..Min Temp Comparison=5.00E-003 vs Temperature Convergence Tolerance=2.00E-002 - Pass Convergence
   **   ~~~   ** ..Max Heat Load Comparison=1.6990E-004 vs Loads Convergence Tolerance=2.00E-002 - Pass Convergence
    What is the meaning?
** Warning ** HEAT EXCHANGER:AIR TO AIR:GENERIC "AHU_2 HEAT RECOVERY"
   **   ~~~   ** Average air volume flow rate is <50% or >130% of the nominal HX supply air volume flow rate.
   **   ~~~   ** Air volume flow rate ratio = 4.958E-002. Occurrence info=COIMBRA - PRT IWEC DATA WMO#=085490, 01/17 08:00 - 09:00
    How can simulate exhaust fans (Kitchen, WC) using the HVAC Compact System? (I am using version 2.1)
    How should I select a certain variable and after that insert a meter to visualize it?
    How should I customize a meter report ?
 My Best Regards
    A L


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/