[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Erroneous Report Variables
For the report variables, Mean Air Temperature and Mean Radiant
Temperature have changed in V2.2 to Zone Mean Air Temperature and Zone
Mean Radiant Temperature. As the warning says, open the rdd file and
search for "Mean Air Temperature". You will find the new variable name.
If you do not have an rdd file, enter the report for the variable
dictionary (rdd file - report data dictionary).
Report,
Variable Dictionary; !- Type_of_Report
I'm not sure why your zone is at 0C.
vincent.priori wrote:
>
> Hello,
>
> I'm having some issues to run EnergyPlus Simulation with my Ecotect
> model, here is the warning appearing after each run :
>
> ** Warning ** The following Report Variables were requested but not
> generated
> ** ~~~ ** because IDF did not contain these elements or
> misspelled variable name -- check .rdd file
> ************* Key=2, VarName=MEAN AIR TEMPERATURE, Frequency=Hourly
> ************* Key=*, VarName=MEAN RADIANT TEMPERATURE, Frequency=Hourly
>
> Everything else works perfectly but the zone air temperature is still
> at 0°C.
> I also made run with ecotect files with only one cubic and simple zone
> to be sure : same story.
>
> If I delete theses reports variables from the IDF file, I don't have
> any warning but I can't have the zone air temperature either (but
> that's normal in this case).
>
> Do anyone had the same problem and/or have any idea of what could
> cause such problems ?
>
> Vincent Priori
>
> PS1 :I'm using EP 2.2 and the full transition tool to convert 1.2.3
> idf files into 2.2 version. (there's a problem with people definition
> if you don't, not like the 2.1 version).
>
>
--
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu
UCF - From Promise to Prominence: Celebrating 40 Years
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/